Prozess-Krane

Optimal corrosion protection even in tough environments. Flanges and reel drum are manufactured from hot dip galvanized steel.

Reliable operation with standardized slip ring assembly.

Highly durable, maintenance-free and contactless torque transmission - standard motor with magnetic coupler.

Typical applications:

• Gantry cranes
• Overhead cranes
• Grabs or magnets
• Transfer cars
• Waste water treatment facilities
• Theater stage rigging

Cellular bumpers / buffers are characterized by high energy absorption with long compression lengths. This results in low final pressures and favorable retardation values. Cellular buffers are made from a cellular Polyurethane Elastomer with high structural resistance. Their principal quality is the volume compressibility, which is responsible for their relatively low transverse expansion during load application. Cellular buffers are resistant to aliphatic hydrocarbons, such as oil and grease, and against ageing. A general resistance can therefore be assumedfor technical applications.

The cellular buffers are not resistant to strong acids and leaches. The operating temperature is between –20°C and +80°C.

Generally special types are only offered and supplied on request. If cellular buffers are mounted over 3 m high they have to be secured by installation of safety ropes.

Material of the cellular body

Standard quality

• Cellular Polyurethane Elastomer with volumetric weight 0.53 g/cm³

Special quality

• For dynamic load and high elasticity
• Special volumetric weight 0.35 g/cm³ (soft) to 0.65 g/cm³ (hard)